Log in

View Full Version : Good Wednesday (aka The Night Before The Night Before Christmas)


Greenguy
2009-12-23, 08:47 AM
Morning |waves|

It's a balmy 17° here in Buffalo, but the forecast is calling for rain of Friday |angry|

Not much on the agenda for today except for free site stock-piling for the new year :)

MrMaryLou
2009-12-23, 08:50 AM
Good Morning All :) I got nothing at all as normal :(

Rowdy
2009-12-23, 09:04 AM
Morning :)

The snow all gave way to rain here. More rain in the forecast so it's looking like a wet holiday here instead of a white one.

Cleo
2009-12-23, 09:04 AM
Wow it's really cold here, only 69˚F this morning. |jester|

I know how chilly it is this morning because the first thing we had to do was get out the 12 volt tire pump and fill up Christy's flat tire that had a big roofing screw in it before the sun came up this morning. She just called me from the local tire place that charged her $28 bucks to fix it. Her job will reimburse her since it was a roofing screw but when did fixing a flat start costing $28 bucks?

I'm loving this U-Verse. I'm amazed how fast it is. It actually got fast several hours after it was installed and I'm now getting over 14 kbps.
http://cleos-porn-links.com/blogpics/uverse-speed-test-results-122209.png
The only thing I don't like about it is that the gateway doesn't allow loopback or putting it in bridge mode so that I can use my own router so we have to turn off wifi on our iPhones to use the X10 controller and then turn wifi back on to use the iTunes remote.

Both of us have annoying mild colds that are lingering. Going to try to make it to the gym today depending on how I feel in a few hours. I'm behind in work due to having most of yesterday disrupted with the U-Verse install so also going to be trying to get caught up in work today.

terry
2009-12-23, 09:09 AM
Good Morning and Happy Wednesday Everyone.

I have to get out for some last minute stuff today, and shovel the snow.

Have a great day!

Ramster
2009-12-23, 09:12 AM
Good Morning. Worked late last night, working more today and have to run out briefly today.

pc
2009-12-23, 09:40 AM
Good Morning Everyone and have a good Wednesday.

Nymph
2009-12-23, 09:58 AM
Good morning everyone!

Just more sorting & packing for me today.

J-SiN
2009-12-23, 10:14 AM
Good morning! I can't wait to just not work on Christmas Eve.

Jim
2009-12-23, 10:50 AM
Good Morning
Last minute christmas stuff today. I found out yesterday that we are having a lot of people here tomorrow. I need to start cooking today. :)

Mike-mijen
2009-12-23, 10:51 AM
Good Morning, Just a few things paln on the net today and then getting ready for Xmas. Have a good one!
Peace

ArtWilliams
2009-12-23, 10:55 AM
Good morning. Getting ready for Christmas and some mainstream work. Have a great day!

bluebrit
2009-12-23, 12:40 PM
Good morning people :)

More of the same for today but we do have to go out into the madness later, which no doubt means crazy drivers and insane people ramming us with full shopping carts!!

Can't you feel the love out there...

bDok
2009-12-23, 01:03 PM
Morning. Bunch of work to get done today. Early afternoon I'll be running to the mall for a minute to get some stuff. Tonight going to my grandma's house to do an xmas dinner with her.

Then it's on to my folks house to relax for a couple days. I'm excited that on the day after xmas doing the Claus Cup. Ton friends going golfing. :)

Time to get things rolling on this hump day.

JustRobert
2009-12-23, 01:09 PM
Good Morning :)

Time For Work...YeeMerryHaa!

MeatPounder
2009-12-23, 01:12 PM
The only thing I don't like about it is that the gateway doesn't allow loopback or putting it in bridge mode so that I can use my own router so we have to turn off wifi on our iPhones to use the X10 controller and then turn wifi back on to use the iTunes remote.



What I did was simply turn off the wi fi on the U-verse Gateway and plug my dual wan router into it with my own router set to dynamically get it's ip from the U-Verse one

So my hookup is, the only things plugged into my U-verse is my tv boxes, my living room media center pc, and my router

My router is also plugged into my 8 meg comcast modem

I don't do load balancing because of the disparity of 18 meg att and 8 meg comcast, but use my routers port access control to route specific programs ports to use the comcast first (my trading platforms, napster, etc), with both gateways in a fall back in case either goes down

All my wireless is handled by my own router

Cleo
2009-12-23, 01:53 PM
What I did was simply turn off the wi fi on the U-verse Gateway and plug my dual wan router into it with my own router set to dynamically get it's ip from the U-Verse one

So my hookup is, the only things plugged into my U-verse is my tv boxes, my living room media center pc, and my router

I've also turned off wifi on their router and my Airport Extreme is in bridge mode. So basically I have a huge box that is doing nothing but being a router and not a very good one at that.

It actually sounds like you are double NATed if you have both your router and their gateway doing NAT.

Either way it doesn't solve the problem of their gateway not allowing loopback. The only way there would be to solve that is to put their gateway into bridge mode and using your own router but their gateway can't be put into bridge mode.

As an experiment I tried making my Airport Extreme the router and setting up DMZ to it from their gateway but as expected this didn't solve the loopback issue.

I've posted on the developer’s website for the X10 Commander (http://melloware.com/products/x10commander/) asking if he could add the ability to add more then one server so that I could put the local address and the public address in it's prefs and he said he would look into it.

The only other solution that I can think of is to setup BIND (http://en.wikipedia.org/wiki/BIND) on one of my Macs and add in the private IP of the Mac that runs the X10 server software and then pointing the DNS on my phone to my own name server. But BIND looks pretty complicated and scary.

smutguy
2009-12-23, 02:07 PM
good morning everyone

kathblack
2009-12-23, 04:57 PM
Happy Hump Day all! Busy baking... almost done!